POLYTECHNIC PROJECT OF TURIN

Calorimetric Climate Chamber

The Calorimetric Climate Chamber designed and built by Il Disgelo for the Polytechnic University of Turin is an essential tool for research and experimentation in the field of energy efficiency and sustainability.

This chamber allows controlled environmental conditions to be simulated and the thermal performance of materials, components and systems to be measured accurately, with a specific focus on energy balance.


Main features
Precise temperature and humidity control to reproduce real operating conditions;

Integrated calorimetric system for accurate heat exchange measurements;

High-performance insulating structure to minimise energy loss;

User-friendly control interface with dedicated software for data and test parameter management;

Compatibility with standard communication protocols for integration into more complex monitoring systems;

Tailor-made for the specific research needs of the Polytechnic University of Turin.


 Technical characteristics
Internal dimensions: 2420 mm H x 5830 mm W x 4030 mm D

Internal dimensions of single climate-controlled chamber: 2420 mm H x 2915 mm W x 4030 mm D

Approximate external dimensions: 3500 mm H x 6350 mm W x 5900 mm D + electrical panel in the rear technical compartment (1500 mm x 4000 mm)

Indoor temperature range: +5°C to +50°C

Outdoor temperature range: -15°C to +50°C

Temperature reading accuracy: ±0.5°C over time

Temperature resolution: 0.1°C

Deviation: ±1°C

Spatial uniformity: ≤ 2°C (IEC-EN-60068-3-5:2018)

Fluctuation over time: ±0.3°C after 60 min stabilisation

Thermal variation speed rise/fall: ≥ 0.5°C/min*

Permissible dissipation:

At -15°C: 3500 Watts

At -5°C: 17000 Watts (for solar park)

At +15°C: 15,000 Watts simultaneous operation (up to 25 kW single)

Adjustable relative humidity: 20% to 95% (between +5°C and +50°C with dew point limit)

Relative humidity accuracy: ±2% to ±3%

Relative humidity resolution: 0.1%

Humidity uniformity: ≤ 5% (stationary tests)

Humidity fluctuation: ±5% after 60 min stabilisation (IEC-EN 600068-3-5:2018)

Approximate weight: 2000 kg chamber + 1700 kg skid

Noise level at 5 m in a non-reverberant room: 65 dB(A)

Installed power: 59 kW (max absorbed 38 kW with simultaneity factor)

Power supply: 400 V ± 10% three-phase + neutral + earth

* Values with empty chamber without internal load according to IEC-EN-60068-3-5 standards

Project carried out through European tender
The supply of the Calorimetric Climate Chamber was awarded following an open European tender, which guaranteed high standards of quality and transparency in the selection process.

Benefits for the Polytechnic
Advanced support for research in the energy and environmental sector;

Possibility of conducting reproducible tests with high precision;

Fundamental tool for the development of sustainable technologies with low environmental impact

AT YOUR FULL DISPOSITION

Request information or a FREE quote

Enter in the fields below, all the requested data. We will respond to your request as quickly as possible.